ENCLOSURE Namelist

The ENCLOSURE namelist specifies the mesh used by genre, along with the side sets where view factors are to be computed.

Required/Optional:: Required
Single/Multiple Instances:: Single

name 

A user-supplied name for the enclosure.

Type:: string
Default:: "RadE"

mesh_file 

Path to the Exodus/Genesis mesh file.

Type:: case-sensitive string
Default:: none

ignore_block_IDs 

List of element blocks to mask-off from the mesh.

Type:: integer list
Default:: none

List of side sets specifying the surface. All surface faces must belong to the boundary of the mesh less any element blocks specified by ignore_block_IDs. By default it is a fatal error if not satisfied; see warn_non_boundary.

Type:: integer list
Default:: none

warn_non_boundary 

If any surface faces specified by side_set_ids are non-boundary faces, this normally fatal error is reduced to a warning when this parameter is true. Such faces are not included in the surface, and the number of such faces for each side set are written to the terminal.

Type:: logical
Default:: F

symmetries 

List of up to 3 symmetry operations

Type:

string list (3 max)

Default:

none

Valid Values:

"Mirror<a>", a = X, Y, Z; e.g. "MirrorZ"
"Rot<a><n>", a = X, Y, Z; n integer; e.g. "RotZ3", "RotX16"

displace_side_set_ids 

List of side sets whose surfaces will be displaced by the vector specified by displacement.

Type:: integer list
Default:: none

Note

Displacing surfaces is optional. Any displaced surfaces must be totally disconnected from the remaining enclosure surfaces (this is checked). The constant displacement must be compatibile with the specified symmetries (this is not checked). This is useful when the mesh consists of disconnected parts that will be shifted relative to one another. Instead of generating multiple 3D meshes, a single 3D mesh plus use of this displacement option is all that is needed.

displacement 

(x,y,z) displacement vector.

Type:: real 3-vector
Default:: none